DIS-IP200�ձ�CEDARŤ���yԇ�x

TORQUE TESTER ��DIS-IP series
Management of various torque wrench torque drivers A new function is carried ��1�� Display Board Became Legible. ����A Measurement mode ��nd a unit. Other coded data is��displayed.�� ��2�� Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ��nd Detector dissociate. Easy to install to small space. Torque wrench��pre set type��,Torque driver,etc. It stands to inspection ��nd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�� �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time ��every about 1/180 seconds��.�� �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance ��0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec�� can be set up. ����It is very convenient for a continuous check. ��The operation torque of a QL type ��nd pre set type wrench driver can read measured value correctly in peak down mode ��P-D��.
Specification DIS-IP05 ��IS-�ɣ�5 ��IS-�ɣ�50 ��IS-�ɣ�200 ��IS-�ɣ�500
Measuring range ��at  time of Track�� 2.0��500 mN?m 0.30��50 kgf?cm 0.30��45 lbf?in
0.030��5 N?m 0.30��50 kgf?cm 0.30��45 lbf?in
030��50 N?m 3.0��500 kgf?cm 3.0��450 lbf?in
3.0��200 N?m 30��2000 kgf?cm 30��1740 lbf?in
3.0��500 N?m 30��5000 kgf?cm 30��4500 lbf?in
Accuracy ±0.5%     ��499 or less digit±3digit��
Display The 4 figures digital display of LCD
The measurement direction CW-CCW ��right ��nd left��
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ��nd a minimum value are in a measuring range, ��nd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ��nd the average value Displays, memory ��nd output the data number, the maximum, the minimum, ��nd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time ��0.5 - 3.0 sec,selectable at each 0.5 sec��. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat ��Baud rate :19200��
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells ��700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100��W�� x105��D�� x33 ��H�� ��It does not contain by the projection thing.��
Weight Meter part    520g
Code length Standard 1m ��there are automatic machines no less than 4m as an option.��
Accessories  ��one piece each��
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
�� Φ40 Φ50 Φ60 Φ80
�� 41.2 63 73 99
�� 5 10 10 15.5
�� Φ60 Φ90 Φ110 Φ140
�� Φ50 Φ74 Φ90 Φ116
����Three division�� Φ4.2 Φ6.3 Φ8.3 Φ10.5
�ǡ���Socket intuition affinity�� 6.35��� 9.5��� 12.7��� 19���
weight 189�� 632�� 1.8��� 3���

DIS-IP50�ձ�CEDARŤ���yԇ�x

TORQUE TESTER ��DIS-IP series
Management of various torque wrench torque drivers A new function is carried ��1�� Display Board Became Legible. ����A Measurement mode ��nd a unit. Other coded data is��displayed.�� ��2�� Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ��nd Detector dissociate. Easy to install to small space. Torque wrench��pre set type��,Torque driver,etc. It stands to inspection ��nd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�� �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time ��every about 1/180 seconds��.�� �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance ��0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec�� can be set up. ����It is very convenient for a continuous check. ��The operation torque of a QL type ��nd pre set type wrench driver can read measured value correctly in peak down mode ��P-D��.
Specification DIS-IP05 ��IS-�ɣ�5 ��IS-�ɣ�50 ��IS-�ɣ�200 ��IS-�ɣ�500
Measuring range ��at  time of Track�� 2.0��500 mN?m 0.30��50 kgf?cm 0.30��45 lbf?in
0.030��5 N?m 0.30��50 kgf?cm 0.30��45 lbf?in
030��50 N?m 3.0��500 kgf?cm 3.0��450 lbf?in
3.0��200 N?m 30��2000 kgf?cm 30��1740 lbf?in
3.0��500 N?m 30��5000 kgf?cm 30��4500 lbf?in
Accuracy ±0.5%     ��499 or less digit±3digit��
Display The 4 figures digital display of LCD
The measurement direction CW-CCW ��right ��nd left��
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ��nd a minimum value are in a measuring range, ��nd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ��nd the average value Displays, memory ��nd output the data number, the maximum, the minimum, ��nd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time ��0.5 - 3.0 sec,selectable at each 0.5 sec��. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat ��Baud rate :19200��
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells ��700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100��W�� x105��D�� x33 ��H�� ��It does not contain by the projection thing.��
Weight Meter part    520g
Code length Standard 1m ��there are automatic machines no less than 4m as an option.��
Accessories  ��one piece each��
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
�� Φ40 Φ50 Φ60 Φ80
�� 41.2 63 73 99
�� 5 10 10 15.5
�� Φ60 Φ90 Φ110 Φ140
�� Φ50 Φ74 Φ90 Φ116
����Three division�� Φ4.2 Φ6.3 Φ8.3 Φ10.5
�ǡ���Socket intuition affinity�� 6.35��� 9.5��� 12.7��� 19���
weight 189�� 632�� 1.8��� 3���

DIS-IP5�ձ�CEDARŤ���yԇ�x

TORQUE TESTER ��DIS-IP series
Management of various torque wrench torque drivers A new function is carried ��1�� Display Board Became Legible. ����A Measurement mode ��nd a unit. Other coded data is��displayed.�� ��2�� Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ��nd Detector dissociate. Easy to install to small space. Torque wrench��pre set type��,Torque driver,etc. It stands to inspection ��nd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�� �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time ��every about 1/180 seconds��.�� �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance ��0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec�� can be set up. ����It is very convenient for a continuous check. ��The operation torque of a QL type ��nd pre set type wrench driver can read measured value correctly in peak down mode ��P-D��.
Specification DIS-IP05 ��IS-�ɣ�5 ��IS-�ɣ�50 ��IS-�ɣ�200 ��IS-�ɣ�500
Measuring range ��at  time of Track�� 2.0��500 mN?m 0.30��50 kgf?cm 0.30��45 lbf?in
0.030��5 N?m 0.30��50 kgf?cm 0.30��45 lbf?in
030��50 N?m 3.0��500 kgf?cm 3.0��450 lbf?in
3.0��200 N?m 30��2000 kgf?cm 30��1740 lbf?in
3.0��500 N?m 30��5000 kgf?cm 30��4500 lbf?in
Accuracy ±0.5%     ��499 or less digit±3digit��
Display The 4 figures digital display of LCD
The measurement direction CW-CCW ��right ��nd left��
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ��nd a minimum value are in a measuring range, ��nd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ��nd the average value Displays, memory ��nd output the data number, the maximum, the minimum, ��nd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time ��0.5 - 3.0 sec,selectable at each 0.5 sec��. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat ��Baud rate :19200��
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells ��700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100��W�� x105��D�� x33 ��H�� ��It does not contain by the projection thing.��
Weight Meter part    520g
Code length Standard 1m ��there are automatic machines no less than 4m as an option.��
Accessories  ��one piece each��
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
�� Φ40 Φ50 Φ60 Φ80
�� 41.2 63 73 99
�� 5 10 10 15.5
�� Φ60 Φ90 Φ110 Φ140
�� Φ50 Φ74 Φ90 Φ116
����Three division�� Φ4.2 Φ6.3 Φ8.3 Φ10.5
�ǡ���Socket intuition affinity�� 6.35��� 9.5��� 12.7��� 19���
weight 189�� 632�� 1.8��� 3���

DIS-IP05�ձ�CEDARŤ���yԇ�x

TORQUE TESTER ��DIS-IP series
Management of various torque wrench torque drivers A new function is carried ��1�� Display Board Became Legible. ����A Measurement mode ��nd a unit. Other coded data is��displayed.�� ��2�� Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ��nd Detector dissociate. Easy to install to small space. Torque wrench��pre set type��,Torque driver,etc. It stands to inspection ��nd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�� �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time ��every about 1/180 seconds��.�� �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance ��0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec�� can be set up. ����It is very convenient for a continuous check. ��The operation torque of a QL type ��nd pre set type wrench driver can read measured value correctly in peak down mode ��P-D��.
Specification DIS-IP05 ��IS-�ɣ�5 ��IS-�ɣ�50 ��IS-�ɣ�200 ��IS-�ɣ�500
Measuring range ��at  time of Track�� 2.0��500 mN?m 0.30��50 kgf?cm 0.30��45 lbf?in
0.030��5 N?m 0.30��50 kgf?cm 0.30��45 lbf?in
030��50 N?m 3.0��500 kgf?cm 3.0��450 lbf?in
3.0��200 N?m 30��2000 kgf?cm 30��1740 lbf?in
3.0��500 N?m 30��5000 kgf?cm 30��4500 lbf?in
Accuracy ±0.5%     ��499 or less digit±3digit��
Display The 4 figures digital display of LCD
The measurement direction CW-CCW ��right ��nd left��
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ��nd a minimum value are in a measuring range, ��nd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ��nd the average value Displays, memory ��nd output the data number, the maximum, the minimum, ��nd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time ��0.5 - 3.0 sec,selectable at each 0.5 sec��. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat ��Baud rate :19200��
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells ��700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100��W�� x105��D�� x33 ��H�� ��It does not contain by the projection thing.��
Weight Meter part    520g
Code length Standard 1m ��there are automatic machines no less than 4m as an option.��
Accessories  ��one piece each��
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
�� Φ40 Φ50 Φ60 Φ80
�� 41.2 63 73 99
�� 5 10 10 15.5
�� Φ60 Φ90 Φ110 Φ140
�� Φ50 Φ74 Φ90 Φ116
����Three division�� Φ4.2 Φ6.3 Φ8.3 Φ10.5
�ǡ���Socket intuition affinity�� 6.35��� 9.5��� 12.7��� 19���
weight 189�� 632�� 1.8��� 3���

���®a(ch��n)Ʒ

���T�x���� Һ��ɫ�V�x ����ɫ�V�x ԭ�ӟɹ���V�x ��Ҋ�ֹ���Ӌ Һ�|(zh��)“(li��n)�Ãx ����ԇ�C ���Ӌ��PHӋ�� �x�ęC �����x�ęC ����x�ęC �����@΢�R �����@΢�R �˜����|(zh��) ����ԇ��