Ʒ���� ƿ�wŤ���y(c��)ԇ�x
��� ƿ�wƿ���z�y(c��)�x�� - ƿ�wŤ���x
�a(ch��n)Ʒ��B��
ƿ�b���b�a(ch��n)Ʒƿ�w�o�i���_����Ť��ֵ��С�������a(ch��n)��ˇ����Ҫ���ƅ���(sh��)��Ť��ֵ�Ƿ���m����(du��)�a(ch��n)Ʒ���\(y��n)ݔ����K���M(f��i)�߶��кܴ��Ӱ���Ť��ֵ̫С���a(ch��n)Ʒ���ܰl(f��)��й¶��Ť��ֵ̫������K���M(f��i)�߿��ܺ��y���_�� ƿ�wŤ��Ӌ(j��)�nj��T��y(c��)��ƿ�b�a(ch��n)Ʒƿ�w�o�i���_����Ť��ֵ��С�Č��Ãx����ԓ�x������Խ����ƿ�wŤ���z�y(c��)�ИI(y��)��(bi��o)��(zh��n)�x���� �Y(ji��)��(g��u)ԭ�팢���y(c��)�a(ch��n)Ʒ�̶��ڃx���ĊA�����棬ԓ�A���cһ��(g��)�߾��ȵ�Ť�������B����ͨ�^(gu��)���D(zhu��n)ƿ�w��Ť��Ӌ(j��)��(hu��)�y(c��)���õ�����(y��ng)Ť��ֵ���������A�߿����b�A�LjA���w��ƿ�Ρ�
���g(sh��)����(sh��)��
�y(c��)��������
0��10kgf.cm/50kgf.cm/
100kgf.cm ±0.5%FS
����Q��kgf.cm/ibf.in/N.m
�@ʾ��4λLCD�@ʾ
�y(c��)����ʽ������/��ۙ
��ɳ��懚�늳�
���d��(b��o)����늳ز���ָʾ
�m��ƿ�wֱ����5mm��100mm
ݔ��ģ�M/��(sh��)�ֽӿڣ�RS232�x�䣩
����A�X�Ͻ���b��
ָ�ʽŤ���x Ť���y(c��)ԇָʾ��
��̖(h��o)JC03-securepak
����(sh��)��̖(h��o)MRMRA
���x��(sh��)0-25inch-lbs/1inch-lb
0-50inch-lbs/2inch-lb
0-100inch-lbs/5inch-lb
0-150inch-lbs/10inch-lb
���ȝM����֮±4��
����12lbs
�15lbs
����b�ߴ�19.5��11.5��5.75inch
��עֻ�Ђ�(g��)�����Ť��ָʾ���ɷ������п����õĜy(c��)ԇָʾ��
�z�y(c��)�(xi��ng)Ŀ��Ť���y(c��)ԇ ƿ�w�Q�o �_�����Ĝy(c��)ԇ����ƿ.���ƿ�wŤ���x��Ҫ��;��ƿ�wŤ���x���ڙz�y(c��)ƿ�w�_�������o��Ť������(y��ng)���ڼ���ˮ����֭��������^ƿ��ʳ����������ƿ��ˎƿ������ܵ�ƿ�b�a(ch��n)Ʒ��ƿ�wŤ�����Ǚz�y(c��)ƿ�wŤ���ı�x��������ƿ.���ƿ�wŤ���x��Ҫ���c(di��n)��
1��ȫ����Һ���@ʾ��������(ji��n)����ʹ�÷�����
2��Ť����С��LCDҺ���@ʾ���x��(sh��)��(ji��n)�������_����С�x��(sh��)�_(d��)0.0001N.m��
3�����з�ֵ���Ԅ�(d��ng)��ֵ�͌�(sh��)�r(sh��)ֵ���N�y(c��)ԇģʽ��
4������형r(sh��)ᘡ���r(sh��)ᘹ������ɜy(c��)���o�����ɼ���Ť����
5���Y(ji��)��(g��u)���ֺ�(ji��n)������(ji��n)����
6���y(c��)�����ֱ����1.5—20cm��
7���x��ʹ�ÿɳ��懚�늳ع����
8���M����120%�^(gu��)�d���o(h��)��
9��N.m,kgf.cm,lbf.in���N�y(c��)ԇ��λ��Q����
10���Gɫ�h(hu��n)�����o(w��)�����Ԅ�(d��ng)�P(gu��n)�C(j��)������
11�����ô�ӛ���������ɴ惦(ch��)99�M�y(c��)ԇ��(sh��)��(j��)��
12���������O(sh��)�ù�������������ָ���ָʾ���������Q����(b��o)����
13.�m�ϸ��N�ߴ���Π��ƿ�w��ƿ�w�� ƿ�w�������y(c��)ԇ��Ҳ�ɵ����y(c��)ԇ��
����ƿ.���ƿ�wŤ���x��Ҫ����(sh��)��
Ҏ(gu��) �� 10Nm 20Nm �����x��
���ȣ� 0.0001N.m
�y(c��)������N.m�� 0-20N.m���ɓQ��lbf.ln��kgf.cm���y(c��)����ʽ�� ��ۙ������
�Դ����늕r(sh��)�g����1.2V懚�늳�×5��(ji��)1.2VNIHM���6С�r(sh��)
���ó�늣� ��ݔ�뽻��220V��240Vݔ��ֱ��7.2V400mA��
��M�ʹ�Õr(sh��)�g�� 20С�r(sh��)
늳؉����� �s�ɳ��300��
�ߴ�/������ 330mm×75mm×195mm 10Kg
��(bi��o)������(zh��n)
GB/T 17876��BB/T 0025��BB/T 0034(GB/T 14803)�� ASTM D 2063��ASTM D 3198��ASTM D 3474
����ƿ.���ƿ�wŤ���x����
��(bi��o)��(zh��n)������C(j��)�������
�xُ(g��u)�����ʹ�ӡ�C(j��)
TNK-05B��(sh��)��ʽƿ�w�_��Ť���x | |||||
ģʽ��(bi��o)־ | �o(w��)��(bi��o)־�����D(zhu��n)ƿ�w | ||||
�o(w��)��(bi��o)־�����D(zhu��n)ƿ�w������ӡ�C(j��) | TNK-05B | TNK-10B-�� | TNK-20B-�� | TNK-50B-�� | TNK-100B-�� |
1�����Iƿ�w������ӡ�C(j��) | |||||
4�����D(zhu��n)ƿ�w�������C(j��) | |||||
5�����Iƿ�w����ӡʽ | |||||
�y(c��)������ | 0.00~±9.0 | 0.00~±8.1 | 0.00~±96.1 | 0.00~±90 | 0.00~±81 |
N.cm��Kgf-cm�� | ��0.00~±.00�� | ��0.00~±0.00�� | ��0.00~±0.00�� | ��0.00~±0.0�� | ��0.00~±00.0�� |
�y(c��)����Ԫ | Kgf.cm-N.cm�܉Qʹ�ã�ͨ�^(gu��)��������O(sh��)���_�P(gu��n)�_��(l��i)��׃�� | ||||
���d���o(h��) | ��(n��i)��Ť��������������ؓ(f��)�ɳ��d�^(gu��)�~��ֲ���A�����Կ������D(zhu��n)��(d��ng)�� | ||||
���P���� | ֱ��10-190mm���P��L(zh��ng)�Ȟ�30mm | ||||
�@ʾ | 4��(g��)��(sh��)�ֶ��O�ܣ��ַ��L(zh��ng)��15.2mm�� | ||||
�@ʾ���� | ؓ(f��)999.9~��~��999.9 | ||||
�^(gu��)�d | ��(d��ng)�^(gu��)�d�r(sh��)��(hu��)�@ʾ000.0 | ||||
�@ʾ���� | һ��ķ��� | ��20��M���̵�1%��1���0.03%���@ʾ�����cŤ�ز���(d��ng)�ɷ��ȣ� | |||
�˷��@ʾ | ͨ�^(gu��)ǰ��������������˔�(sh��)���O(sh��)�Þ�0.1��9999.9 | ||||
��Ч��(zh��n) | �|��ǰ��������İ��I | ||||
�y(c��)��ģʽ | �_��ģʽ | ��ֵ�@ʾ | |||
�P(gu��n)�]ģʽ | ��ÿ0.03������ֵ��0.125���(n��i)�������@ʾ�� | ||||
��ֵģʽ | ��ֵ�@ʾ����(sh��)�r(sh��)�@ʾ��ÿ0.03���ƽ��ֵ��0.125���(n��i)�������@ʾ | ||||
�y(t��ng)Ӌ(j��)��(sh��)��(j��) | ��Ʒ�������̖(h��o) | ���ֵ��XMAX�� ��Сֵ��XMIN�� ƽ��ֵ∑Xi/N ��(bi��o)��(zh��n)ƫ��ֵ√∑��Xin/N��2/N �x��3 ×100 ����ֵ�Д� �x�%����OVER+UNDER��N×100 | |||
N:��Max.100�� | |||||
��ӡ�C(j��)��(n��i)��TNK-4�� | ��ӡ���������c(di��n)� �������Ἀ ���� | ||||
�ַ���7×5�c(di��n)� ��55���� �� 65�� �L(zh��ng)15�� | |||||
RS-232C�ӿ� | ݔ�������������\(y��n)��ģʽ������λ��������ݔ��������ģʽ ���ⲿ�����ݔ�����ݔ���� | ||||
�����ʣ� 1200/4800����/�� | |||||
��(sh��)λ�L(zh��ng)�ȣ�7/8bit | |||||
У�(y��n) �o(w��)/ż��(sh��)Ч�(y��n)/�攵(sh��)Ч�(y��n) | |||||
ֹͣλ�L(zh��ng)�ȣ�1/2 bit CR/CR+LF | |||||
��(sh��)��(j��)�惦(ch��)���O(sh��)�� | ����ʧ�Դ惦(ch��)�� | ��(sh��)��(j��)�惦(ch��)�r(sh��)�g��10������ | |||
��E2PROM�� | ������(sh��)��10000������ | ||||
�� | �惦(ch��)��(sh��)��(j��)����/����ֵ�����c(di��n)ֵ���M�̶�Ч��(zh��n)ֵ | ||||
�����ض� | 0~40�� | ||||
�ض� | ��=90%�������ϣ��o(w��)��⣩ | ||||
����(d��ng)�ֿ��� | JIS C-0911 111C 2nd class��0.33mm 10-50HZ�� | ||||
���ɔ_�� | 98145.451 | ||||
98145.451 | ����� 100��~120�� ��230��50/60��Ɲ 15�� �Դ�� 2.4�ף������^��.��ُ(g��u)�r(sh��)Ո(q��ng)ָ�����늉� | ||||
���γߴ� | 450��218��199 | ||||
���� | 11�������ӡ�C(j��)12��� | ||||
���� | �Դ��2.4�ף������^�������P�30���ס� ��ӡ�C(j��)����20�� ���Hָ���д�ӡ�C(j��)�ăx���� | ||||
�x�(xi��ng) | ���P� 10������15������50���� | ||||
���ڴ���RS-232C����|��Ҳ������NEC��PC9801����3�ס� |
Management of air tool / oil pulse tool |
��Torque Tester �@DI-4B-25 |
![]() ![]() |
For Daily Torque measurement of a small impact Tool, Air screw DriversHigh Torque Electric drivers DI-4B-25 - Up to MAX. 25 N.m (250 kgf.cm) - With Blow Counter for Impact Tools. - High Luminous LED Display for high visibility in dark place |
Specification | DI-4B-25 | |||
Measuring range | 0.30�`25 N�m �@3.0�`250 kgf�Ecm�@3.0�`220 lbf�Ein | |||
Operative Measuring Range at P-D Mode | 0.70 - 25 N.m �@�@7.0 - 250 kgf.cm�@�@7.0 - 220 lbf.in | |||
Accuracy | �} 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | |||
Display | Torque Meter | LED Digital Display, 4 digits | ||
Blow Counter | LED Digital Display, 2 digits (Displayed only in P-P mode) | |||
Measureing Direction | CW, CCW selectable with a Switch | |||
M''ment Mode | P-P Peak | Holding Peak Load Value | ||
T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | |||
P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||
Blow Counter | Count Range | Zero to 99 blow | ||
Count Time | 0.1 - 9.9 seconds | |||
Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button | |||
Data output | Serial Interface RS232C (Baud rate: 9600) | |||
Power Supply | Battery | Ni-Cd Chargeable Battery 1.2V x 5 cells (700mAh) | ||
Automatic PW off | Automatically power off after 5 minutes left without operation | |||
Charging time | Within 6 hours | |||
Continunous working time | 8 hours | |||
Battery Life Time | Chargeable more than 300 times | |||
Weight | 2.1kg | |||
Dimension | 150(W) x220(D) x74 (H) | |||
Accessories (one piece each) | Bit Socket ( 6.35 HEX - Subtense 17mm ) | |||
Measuring Joint : Hard Type (M10) & Soft Type (M10) | ||||
Socket for Wrenches ( Subtense 17mm ) | ||||
Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC- DC 7.5V 120mA Output | ||||
Exclusive receipt case | ||||
An inspection report, a proofreading certificate, traceability system figure |
Attachment�@About the method of application of an attachment | |
Soft joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 3 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For elastic body. | |
Hard joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 1/10 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For hard body. |
Screw tightening control |
�� DIGITAL TORQUE DRIVER �@DID-4M |
![]() ![]() |
(1) Unify the display sectiona frame. It became stronger. (2) Display Measurement Mode, Unit, Etc. on Display Section. (3) Data Output is USB Form. (4) Prepare each button in accordance with operation. Button operation became simple |
��The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ��Available in: lb-in, kg-cmN-m ��Peak, Real TimePeak Down measuring mode (selectable) ��800 data memory. ��Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ��Programmable screw tightening counter ��Programmable Auto Zero function resets unit to zero for easy operation ��Both CWCCW operation ��ASCII format output(USB) ��Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use �� AC chargercarrying case included. |
Specification | DID-4 | ||
Measuring range | 0.020 - 4 N-m | ||
0.20�`40 kgf-cm | |||
0.20�`35 lbf-in | |||
Accuracy | �} 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | ||
Display | The 4 figures digital display of LCD | ||
The measurement direction | CW-CCW (rightleft) | ||
Measuring mode | P-P Peak | Holding Peak Load Value | |
T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | ||
P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||
C Real-time output | Load torque value is outputted every about 1/ 160. | ||
Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing | |
The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||
Data spec. | Data transfer | ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed. | |
Data memory | 800 data / ten channels data | ||
A setup of the number of counts | One to 99 count (count in a direction with a bundle) | ||
Power supply | Ni-Cd chargeable battery 1.2V�~4cells 600mAh | ||
Auto power save | 10 minutes no use, automatically switch off. | ||
Charging time | From empty - less than 5hours | ||
Continunous working time | 12 hours | ||
Bit /Socket part | HEX6.35 | ||
Weight | about 400g | ||
Attachment | Bit�@�i�{�j�@���P�@���Q�@ | ||
Accessories (one piece each) | Dedicated AC/DC Adaptor (Charger),100�`230VAC | ||
An inspection report, a proofreading certificate, a traceability system figure |
HTG2-10N/�ձ�����(m��ng)�_(d��)IMADA|HTG2-5N �ֳ�ʽŤ���x
��̖(h��o) | ���d | �@ʾ | ��С�xֵ |
HTG2-2N | 2N-m | 2.000N-m | 0.001N-m |
HTG2-5N | 5 N-m | 5. 000N-m | 0.001N-m |
HTG2-10N | 10 N-m | 10. 000N-m | 0.001N-m |
HTG2-200NC | 200 N-cm | 200.0N-cm | 0.1N-cm |
HTG2-500NC | 500 N-cm | 500.0N-cm | 0.1N-cm |
HTG2-1000NC | 1000N-cm | 1000.0N-cm | 1N-cm |
�ձ�����(m��ng)�_(d��)IMADA�ֳ�ʽŤ���xHTG2-2N HTG2-5N HTG2-10N HTG2-200NC HTG2-500NC HTG2-1000NC